Micro Motion F025

High accuracy real world performance

 Best-in-class performance on liquid mass flow,

volume flow, and density measurements in a

compact design

 Robust sensor design minimizes down time and

process interruption costs

Best fit-for-application

 Cleanable, self-draining design for critical process

control service

 Compact design enables installation flexibility

and reduced maintenance costs

Exceptional reliability and safety

 Global ISO/IEC 17025 calibration facilities deliver

measurement confidence

More Info

As a practical application of the Coriolis effect, the Coriolis mass flow meter operating principle involves inducing a vibration of the

flow tube through which the fluid passes. The vibration, though it is not completely circular, provides the rotating reference frame

which gives rise to the Coriolis effect. While specific methods vary according to the design of the flow meter, sensors monitor and

analyze changes in frequency, phase shift, and amplitude of the vibrating flow tubes. The changes observed represent the mass flow

rate and density of the fluid.

Reference operating conditions

For determining the performance capabilities of our meters, the following conditions were observed/utilized:

 Water at 68 to 77 °F and 14.5 to 29 psig (20 to 25 °C and 1 to 2 barg)

 Accuracy based on industry leading accredited calibration stands according to ISO/IEC 17025

 All models have a density range up to 3 g/cm 3 (3000 kg/m 3 )




CSA (US and Canada): Class 1, Division 1, Groups C and D


CSA (Canada only); only available with material codes S and P (not available with material codes A, B, or H)


Country Specific Approval – Requires a selection from the Approvals section of the ‘Certificate, Tests, Calibrations and Services’ model code option


IECEx Zone 1


Hardware ready for TIIS approval; requires conduit connection code E when used with electronics interface code 2, 3, 4, 5, Q, A, V, or B


Micro Motion Standard (no approval)


Micro Motion Standard / PED compliant


NEPSI; only available with language option M (Chinese)


TIIS – T3 Temperature Classification; not available for quote outside of Japan


TIIS - T4 Temperature Classification; not available for quote outside of Japan


UL; only available with models F025S-F200S


ATEX - Equipment Category 3 (Zone 2) / PED compliant


ATEX - Equipment Category 2 (Zone 1) / PED compliant


CSA (US and Canada): Class 1, Division 2, Groups A,B,C,D


IECEx Zone 2 

Consultation online

About Us

We, Tianjin Seles Electromechanical Technology Co., LTD, are a high-tech enterprise located in Tianjin Binhai New Area. We are supplier, distributor, wholesaler & trader of Emerson Mass Flowmeter. Products model included in this range are CMF010,CMF025,CMF050,CMF100,CMF200,CMF300,CMF400; F025,F050,F100,F200,F300,F400.

Follow Us

Copyright © 2019

Tianjin Seles Electromechanical Technology Co., LTD
Powered by AKCMS